Active RFID Technology

Leverage Industry Leading battery powered devices to deliver clinical grade accuracy from #1 RTLS vendor in the world.

Active RFID Infrastructure

Monitor

Provides a low-cost opportunity to create a contiguous read zone. Delivers industry-leading performance and proven enterprise-class reliability.

Virtual Wall

Virtual Walls are Gen2IR™ (Second Generation Infrared) signalling units that provide a method of locating tagged assets or people in facilities that require sub-room level accuracy. Virtual Walls are geared to semi-private rooms and bays typically found in ER and OR settings. Unlike room-level monitors, Virtual Walls do not need physical walls to limit the area of coverage.

Exciter

Low Frequency (LF) Exciters enable several locating features such as egress detection and choke point control. When a tag enters the LF Exciter sphere, the tag’s sensor is triggered and immediately reports this event to the CenTrak Location Engine.

Security Controller Package

The Security Controller package contains the Access Control Keypad, Security Controller and the LF Exciter Antenna. The Security Controller is at the center of CenTrak’s Security Solutions suite as it generates an exciter field, which defines the elevator or door coverage, and supports multiple alerts and alarms.

Asset Tracking Tags

Multi-Mode Asset Tag

Multi-Mode Asset tags can communicate with either Wi-Fi or CenTrak’s Active-UHF Network. Maintenance and management is easy. These tags offer extreme battery life, are fully configurable in the field and allow for wireless upgrades and profile modifications onsite.

Asset Tag Mini

Mini tags feature CenTrak’s Second Generation Infrared technology (Gen2IR™) and Low Frequency technology to support Clinical-Grade Locating™ applications. With a remarkably small profile, these tags are ideal for all medical equipment – particularly smaller assets.

Asset Tag Micro

Micro Tags are ideal for even your most compact pieces of equipment. The tag communicates with CenTrak’s Security Solutions, so facilities can continually monitor assets locations to optimize workflow and utilization, as well as prevent shrinkage.

DuraTag

DuraTags are uniquely designed to be small, rugged and capable of withstanding High-Level Disinfection (HLD), such as medical scope reprocessing. DuraTags are submersible in their hermetically sealed casing for prolonged periods of time, making them ideal for any environment requiring aggressive water treatment and continual physical impact.

Asset Tag with Button

Asset tags were designed to support Clinical-Grade Locating applications and come standard with a customisable button, which can be used to indicate status or workflow milestones.

Ekahau A4

The 2-Button Asset tag is an active location tracking tag operating over standards-based, enterprise-grade Wi-Fi or BLE networks. his tag operates on standard networks and does not require any extra infrastructure beyond your enterprise Wi-Fi or BLE network.

Patient Journey Tags

Patient Tag Mini

Mini Patient Tags are active RTLS tags designed with ergonomic casings. These tags incorporate a tamper detection mechanism enabled as soon as the tag is applied to the skin

31-day Tag

31-day tags provide an economical solution to a wide variety of patient management challenges.  This practical patient tracking solution, utilizes fully waterproof tags which may either be cleaned and reused, discarded or recycled

Single Use Patient tag

Single-Use Patient tags were designed to be worn by one patient and then discarded or recycled, reducing the need for costly infection prevention measures

Patient Secure Tags

SecureTags have the unique ability to detect when they are attached to patients. This enables automatic admission when first being placed on a patient and an immediate alarm when the tag is loosened or has been removed

Patient Tag with Button

Patient tags enable facilities to monitor patient locations and automate workflow. Patients enjoy having the freedom and flexibility to move around a facility as supported by their care plan

Personal Safety Bracelet

CenTrak’s Elpas-Series Personal Safety Bracelet is a wrist-worn Active RFID Tag that provides around-the-clock location monitoring of patients who are prone to wandering or elopement. 

newbaby™ Umbilical Tag

newbaby™ Umbilical tags are designed to be attached to infants using a standard umbilical clamp.  This tag is waterproof to allow for bathing and does not interfere with the operation of other hospital or personal medical equipment

newbaby™ SecureTag

newbaby™ SecureTags are designed to be gentle and safe for infant wear. SecureTags also have the unique ability to detect when it’s attached to a patient, enabling automatic admission and other workflows

newmom™ Tag

newmom™ tags are a part of the matching component of the CenTrak newbaby™ Infant Protection System. The newmom tag generates a LED and audible alert if the wrong infant is matched with the wrong mother and is advanced enough to have up to four multiple newbaby tags matched with a single newmom tag for multiple births.

Ekahau B4

The Advanced Display Personnel tag provides accurate location for tracking people within your enterprise using an existing BLE or Wi-Fi network. These badges are similar in size and shape to typical ID badges to fit easily on a lanyard with other credential cards or on a belt clip.

Staff Workflow and Safety Tags

Staff Badge

Staff badge - Staff Badges are ultra-thin (only 3.8 mm), light weight, and the size of a standard hospital-issued ID badge. Three customizable buttons can be assigned based upon various RTLS use cases

Multi-Mode Staff Badge

Multi-Mode Staff Badges are easily worn by staff members. The tags can be rapidly deployed without additional infrastructure as they are located using existing Wi-Fi network infrastructure. Battery operated Gen2IR components can be added in the future to areas that require greater performance and accuracy (such as for high acuity clinical workflow).

Duress badge

Duress Badges enable immediate response times during emergencies by instantly locating the specific employee under duress. In the event a staff member needs assistance, a discreet push of a button on the Duress badge, summons a wireless call for help

Ekahau W4

The wearable Advanced Wrist Personnel tag features vibration-based alerting and two colored LEDs that signal events to the tag wearer. Users can request help or acknowledge calls conveniently on a comfortable, rechargeable, water-resistant tag designed to be worn like a watch.

Man Down Duress Transmittor

Man Down Duress Transmitter

CenTrak’s Elpas-Series Man Down Duress Transmitter is an Active RFID Tag that provides wireless monitoring of staff members that may be subject to work related injuries or attacks in high-risk, indoor work place environments

Environmental Sensors

Environmental Monitor Sensor

Temperature Sensors use high quality NIST-Traceable probes to monitor a wide range of temperatures reliably and accurately. The sensor comes equipped with two ports to support door ajar sensing, a second temperature measurement, or dry contact equipment alerts

Ambient Sensor

Temperature Sensors use high quality NIST-Traceable probes to monitor a wide range of temperatures reliably and accurately. The sensor comes equipped with two ports to support door ajar sensing, a second temperature measurement, or dry contact equipment alerts. 

Ultra-Low Temperature Sensor

The Ultra-Low Temperature Sensor is a probe‐based temperature sensor that can precisely monitor the temperatures required for cryogenic or extreme low temperature storage and handling. Suitable for measuring temperature from -90 to -30 degree C

Liquid Nitrogen Sensor

The Liquid Nitrogen Sensor is a probe-based temperature sensor that can precisely monitor the temperatures required for cryogenic storage. The sensor comes equipped with a cryogenic probe. Customizable temperatures: -90 °C to -200 °C (+/- 0.5 °C)

Differential Air Pressure Sensor

The Differential Air Pressure Sensor is a dual-port sensor that can accurately and reliably monitor air pressure levels with reporting rates between 1-60 minutes. The sensor provides real-time reporting of pressure between adjoining rooms or hallways and alerts when predetermined thresholds are crossed. Carbon Dioxide Sensor - The Carbon Dioxide Sensor is a probe-based CO2 sensor that can monitor as a stand-alone measurement device and is designed for use in demanding applications, like life science incubators, where stable, reliable, and accurate performance is required

Carbon Dioxide Sensor

The Carbon Dioxide Sensor is a probe-based CO2 sensor that can monitor as a stand-alone measurement device and is designed for use in demanding applications, like life science incubators, where stable, reliable, and accurate performance is required

Hand Hygiene Sensors

External Hand Washing Monitor

External Hand Washing Monitors are battery operated devices that may be mounted to any dispenser, canister, or pump to track their usage. The Hand Washing Monitor communicates each handwashing event to the network which records each caregiver’s compliance performance

Integrated Hand Washing Monitor

Integrated Hand Washing Monitors are directly embedded into dispensers to capture 100% of hand hygiene events at the hospital-, department-, or individual-level. This option does not require additional batteries, as it is powered by the dispenser

Devices

The CORE ESP Platform provides choice of various technologies and can be utilized as per the current facility setup and use cases.